IQi angle version
IQi with an angle head for fasteners where a straight tool does not fit.
Angle head with a ratio of 1.2, fitted and calibrated on a new IQi tool.
The challenge
A straight tool does not always fit over the fastener, yet the torque must still be controlled and documented.
The solution
The IQi tool is converted into an angle version. The angle head affects the torque, so the tool is recalibrated as part of the project. You can still manage cycle data, control the process and receive status alerts.
Technical data
| 5 Nm version | Max 5 Nm input torque, 1/4″ hex quick-change output |
|---|---|
| 15 Nm version | Max 15 Nm input torque, 3/8″ square output |
| Ratio | 1.2 |
| Included | Conversion, angle head, assembly and calibration |
| Ordering | Together with a new IQi tool, ordered separately. The angle head is not sold as a spare part. |
| Limitation | Not for push-to-start IQi |
These figures apply to this example. Your solution is designed around your application. Price and delivery time depend on the project and are stated in the quote. The Ingersoll Rand products and the additional solution components are covered by the full manufacturer warranty.
Describe your task
Do you have a similar task? Tell us what needs to be done and we will go through it together with the Ingersoll Rand engineering team.
More examples
The tool must sit on a machineIQi machine mount: Flange with 2 holes or L-shape with 4 holes.
Several fasteners at onceSix-spindle controlled tightening: Six fasteners in a single controlled operation.
Too heavy to lift by handJib crane with air balancer: Up to 160 kg at 7 bar, 4,800 mm working radius.
Hard-to-reach fastenersIQi angle head with crowfoot: 1–2.4 Nm where ordinary tools cannot reach.Standard range