Emd Gm engine air starters – Ingersoll Rand
Ingersoll Rand air starters for 20 Emd Gm engine models, based on the Ingersoll Rand air starter selection list. Send us your engine model and we will confirm the right flange, pinion and rotation and reply with a quotation.
| Engine model | Engine data | Recommended IR air starters |
|---|---|---|
| Emd Gm 6-268A | 22.8 l, 6 cyl, Diesel | ST1060CP03R25-02G, SS850GD09R51 |
| Emd Gm 6-278A | 62.1 l, 6 cyl, Diesel | SS850GD09R51 |
| Emd Gm 6-498 | 62.1 l, 6 cyl, Diesel | SS850GD09R51 |
| Emd Gm 8-268A | 30.4 l, 8 cyl, Diesel | SS850GD09R51 |
| Emd Gm 8-498 | 82.8 l, 8 cyl, Diesel | SS850GD09R51 |
| Emd Gm 8-561 | 74.4 l, 8 cyl, Diesel | SS850GD09R51 |
| Emd Gm 8-567B | 74.4 l, 8 cyl, Diesel | SS850GD09R51 |
| Emd Gm 8-645 | 82.8 l, 8 cyl, Diesel | ST1060CP03R25-02G, 150BMPD88R54-020 |
| Emd Gm 8-710 | 84.6 l, 8 cyl, Diesel | ST1060CP03R25-02G, 150BMPD88R54-020 |
| Emd Gm 12-278 | 111.6 l, 12 cyl, Diesel | SS850GD09R51 |
| Emd Gm 12-498 | 124.1 l, 12 cyl, Diesel | SS850GD09R51 |
| Emd Gm 12-567C | 93.1 l, 12 cyl, Diesel | SS850GD09R51 |
| Emd Gm 12-645 | 124.1 l, 12 cyl, Diesel | ST1060CP03R25-02G, 150BMPD88R54-020 |
| Emd Gm 12-710 | 126.8 l, 12 cyl, Diesel | ST1060CP03R25-02G, 150BMPD88R54-020 |
| Emd Gm 16-567B | 139.6 l, 16 cyl, Diesel | SS850GD09R51 |
| Emd Gm 16-567VC | 148.7 l, 16 cyl, Diesel | SS850GD09R51 |
| Emd Gm 16-645 | 169.1 l, 16 cyl, Diesel | ST1060CP03R25-02G, ST750GCDP03R25, 150BMPD88R54-020 |
| Emd Gm 16-710 | 186.2 l, 16 cyl, Diesel | ST1060CP03R25-02G, ST750GCDP03R25, 150BMPD88R54-020 |
| Emd Gm 20-645 | 211.4 l, 20 cyl, Diesel | ST1060CP03R25-02G, 150BMPD88R54-020 |
| Emd Gm 20-710 | 232.7 l, 20 cyl, Diesel | ST1060CP03R25-02G, 150BMPD88R54-020 |
- Authorised Ingersoll Rand distributor
- Genuine new Ingersoll Rand products with factory warranty
- Technical advice on air starter and air motor selection
- Quotation tailored to your engine and application
Based on Ingersoll Rand cross-reference data and air starter selection lists. Brand names are trademarks of their owners and are used only to describe compatibility. Always confirm mounting, shaft/flange, pinion and rotation before ordering – send us a nameplate photo and we will check it.