Which size of impact wrench do I need?

As a rule of thumb, 3/8" and 1/2" drives are used for cars, light vehicles and general workshop work, 3/4" for trucks and buses, and 1" for heavy vehicles, construction equipment and mining. Always check the breakaway torque (Nm) your joint requires.

What air pressure do Ingersoll Rand air tools need?

The tools are rated for 6.2 bar (90 psi) at the tool. Air consumption is listed per model on the product page – the compressor, hose and couplings must handle the flow for the tool to deliver full performance.

Can ProTech service the tools and supply spare parts?

Yes. ProTech is an official Ingersoll Rand partner and service centre in the Nordics. We carry out service, repairs and warranty work and supply genuine spare parts and service kits.

How do I request a quote or technical advice?

Contact us at protech@protech.nu or +46 303-891 35. Tell us what job the tool needs to do and we will help you choose the right model.

Which size of impact wrench do I need?

As a rule of thumb, 3/8" and 1/2" drives are used for cars, light vehicles and general workshop work, 3/4" for trucks and buses, and 1" for heavy vehicles, construction equipment and mining. Always check the breakaway torque (Nm) your joint requires.

What air pressure do Ingersoll Rand air tools need?

The tools are rated for 6.2 bar (90 psi) at the tool. Air consumption is listed per model on the product page – the compressor, hose and couplings must handle the flow for the tool to deliver full performance.

Can ProTech service the tools and supply spare parts?

Yes. ProTech is an official Ingersoll Rand partner and service centre in the Nordics. We carry out service, repairs and warranty work and supply genuine spare parts and service kits.

How do I request a quote or technical advice?

Contact us at protech@protech.nu or +46 303-891 35. Tell us what job the tool needs to do and we will help you choose the right model.

Air Tools – Ingersoll Rand

Ingersoll Rand QA1-serien vinkelmutterdragare med fyrkantsfäste

Add to cart

Ingersoll Rand Air Tools

Ingersoll Rand QA1L05C6LD angle nutrunner – cushion clutch – 3/8″ square – 0.4–6.4 Nm

Ingersoll Rand QA1L05D4LD angle nutrunner – direct drive – 1/4″ square – 11.6 Nm

Ingersoll Rand QA1L05D6LD angle nutrunner – direct drive – 3/8″ square – 11.6 Nm

Ingersoll Rand QA1L05S1LD angle nutrunner – 1/4″ hex quick-change – 0.4–6.4 Nm – 500 rpm

Ingersoll Rand QA1L05S1XLD angle nutrunner – 1/4″ hex – 1.3–10.0 Nm – 500 rpm

Ingersoll Rand QA1L05S4LD angle nutrunner – 1/4″ square – 0.4–6.4 Nm – 500 rpm

Ingersoll Rand QA1L05S6LD angle nutrunner – 3/8″ square – 0.4–6.4 Nm – 500 rpm

Ingersoll Rand QA1L05S6XLD angle nutrunner – 3/8″ square – 1.3–10.0 Nm – 500 rpm

Ingersoll Rand QA1L08C1LD angle nutrunner – cushion clutch – 1/4″ hex – 0.4–5.3 Nm

Ingersoll Rand QA1L08C4LD angle nutrunner – cushion clutch – 1/4″ square – 0.4–5.3 Nm

Ingersoll Rand QA1L08D4LD angle nutrunner – direct drive – 1/4″ square – 6.8 Nm

Ingersoll Rand QA1L08S1LD angle nutrunner – 1/4″ hex quick-change – 0.4–5.3 Nm – 850 rpm

Ingersoll Rand QA1L08S4LD angle nutrunner – 1/4″ square – 0.4–5.3 Nm – 850 rpm

Ingersoll Rand QA1L08S6LD angle nutrunner – 3/8″ square – 0.4–5.3 Nm – 850 rpm

Ingersoll Rand QA1L12C1LD angle nutrunner – cushion clutch – 1/4″ hex – 0.4–3.6 Nm

Ingersoll Rand QA1L12D4LD angle nutrunner – direct drive – 1/4″ square – 4.0 Nm

Ingersoll Rand QA1L12S1LD angle nutrunner – 1/4″ hex quick-change – 0.4–3.6 Nm – 1,270 rpm

Ingersoll Rand QA1L12S4SD angle nutrunner – short body – 1/4″ square – 0.4–3.6 Nm

Ingersoll Rand QA2739D angle air drill – 90° – 3/16″ collet – 2,700 rpm – 2.3 Nm

Ingersoll Rand QA2754D angle air drill – 45° small head – 1/4″-28 thread – 2,700 rpm – 1.9 Nm

Ingersoll Rand QA2759D angle air drill – 90° – 1/4″-28 thread – 2,700 rpm – 2.3 Nm

Ingersoll Rand QA33SC03RL-35S6 angle nutrunner – shut-off clutch, 3/8″ square drive, 335 rpm, 16.3–40 Nm

Ingersoll Rand QA4AALD055NP35S08 angle nutrunner – direct drive – 1/2″ square – 55 Nm

Ingersoll Rand QA4AALS011BP25S06 angle nutrunner – 3/8″ square – 5–11 Nm – 1,025 rpm

Ingersoll Rand QA4AALS011NP25S06 angle nutrunner – 3/8″ square – 5–11 Nm – 1,025 rpm

Ingersoll Rand QA4AALS015BP25S06 angle nutrunner – 3/8″ square – 7–15 Nm – 800 rpm

Ingersoll Rand QA4AALS015NP25S06 angle nutrunner – 3/8″ square – 7–15 Nm – 800 rpm

Ingersoll Rand QA4AALS020BP25S06 angle nutrunner – 3/8″ square – 10–20 Nm – 625 rpm

Ingersoll Rand QA4AALS030BP28S06 angle nutrunner – 3/8″ square – 15–30 Nm – 425 rpm

Ingersoll Rand QA4AALS040BP35S06 angle nutrunner – 3/8″ square – 20–40 Nm – 325 rpm

Ingersoll Rand QA4AALS055BP35S08 angle nutrunner – 1/2″ square – 25–55 Nm – 200 rpm

Ingersoll Rand QA4ASLS012BP20Q04 nutrunner – straight, lever start – 1/4″ hex quick-change – 6–12 Nm

Ingersoll Rand QA4ASLS012BP20S06 nutrunner – straight, lever start – 3/8″ square – 6–12 Nm

Ingersoll Rand QA4ASLS012NP41S06 nutrunner – straight, lever start – 3/8″ square – 6–12 Nm

Ingersoll Rand QA4ASLS015BP20Q04 nutrunner – straight, lever start – 1/4″ hex quick-change – 7–15 Nm

Ingersoll Rand QA4ASLS015BP20S06 nutrunner – straight, lever start – 3/8″ square – 7–15 Nm