Ingersoll Rand M007RHR000BT3

Ingersoll Rand M007RHR000BT3 Planetary Gear Vane Air Motor – M007 Series, 0.63 kW, 22,000 rpm

The Ingersoll Rand M007RHR000BT3 is an M007 series non-reversible planetary gear vane air motor. Compact and powerful for its size: planetary gearing with a multi-vane motor, instant start and stop, no overheating under load and no damage when stalled. The series meets ATEX requirements.

Specifications at 6.2 bar (90 psi): power 0.63 kW, free speed 22,000 rpm, speed at max power 11,000 rpm, stall torque 1.04 Nm, torque at max power 0.52 Nm, starting torque 0.79 Nm, air consumption 1.02 m³/min, weight 1.4 kg, length 187 mm, spindle: 1/2″ round keyed shaft. Mounting and shaft of this model: 4-hole face mounting, 3/8″ threaded shaft, rear inlet/exhaust (performance as model M007RHR000AR4).

Size the motor at about 70% of the lowest available air pressure – we help you choose power, gearing and mounting.

0.63 kW
22,000 rpm
stall 1.04 Nm
non-reversible
1.02 m³/min
ATEX

Other versions in the M007 seriesCompare all in a table →

Request a quote

Price and delivery time on quotation.

Features

Atlas Copco equivalent: a similar-performance alternative to Atlas Copco LZB motors LZB42 A200-11.

Based on Ingersoll Rand cross-references (earlier Atlas Copco codes; current lube-free versions are designated LZB..-L-…). Atlas Copco is a trademark of Atlas Copco AB and is used to describe compatibility only. Check mounting and shaft – we will help you choose.

Connections and mounting

Air inlet 1/4″ NPT, exhaust 1/2″ NPT
Flange: 4-hole face mounting
Shaft: 3/8″-24 UNF threaded shaft
Non-reversible (counterclockwise facing the shaft). Direction of rotation can be changed without extra parts by inverting the cylinder.
Performance is the same in both directions of rotation.
Inlet and flange can be repositioned relative to each other in 15° steps.
Always run the motor with sufficient load so that speed does not exceed the maximum allowable speed.

Model code M007RHR000BT3: M007 = series, RH = non-reversible, R = rear air inlet, 000 = direct drive (no gearbox), B = flange, T3 = shaft.

Professional tools in Sweden and the Nordics.

Additional information

Weight	1,4 kg
Dimensions	18,7 × 3,8 × 3,8 cm
Weight (kg)	1.4
Length (mm)	187
Series	Air motors
Free speed (rpm)	22000
Maximum Torque (Nm)	1.04
Power (W)	630 W
Air Consumption (l/s)	17
Motor type	Planetary-geared vane motor

PDFProduct FlyerIngersoll-Rand-M002-M004-M007-Air-Motors-Specifications-ProTechDownload PDF1.4 MB, PDF

PDFProduct CatalogIngersoll Rand Air Motors Catalogue 2021Download PDF11.5 MB, PDF

PDFUser ManualIngersoll Rand M007 Series Air Motors Operation and Maintenance 03536968Download PDF1.8 MB, PDF

PDFSafety InformationIngersoll Rand Rotary Air Motors ATEX Special Conditions 04579751Download PDF1.2 MB, PDF

Compare models

Similar models in the same category – technical data side by side.

	You are viewing M007RHR000BT3	M007RHR000AR4	M002RVR006AR3	M007RVR000AR4	M002RHR004AR3	M002RVR004AR3
Price	Request quote	Request quote	Request quote	Request quote	Request quote	Request quote
Max. torque	1.04 Nm	1.04 Nm	1.17 Nm	0.85 Nm	0.83 Nm	0.73 Nm
Speed	22000 rpm	22000 rpm	3860 rpm	20000 rpm	6920 rpm	6090 rpm
Weight	1.4 kg	1.4 kg	0.5 kg	1.4 kg	0.46 kg	0.46 kg
Length	187 mm	187 mm	127 mm	187 mm	127 mm	127 mm
Air consumption	17 l/s	17 l/s	4.5 l/s	15.5 l/s	5.7 l/s	4.5 l/s
		View	View	View	View	View