Ingersoll Rand M007RHR374BR6 Planetary Gear Vane Air Motor – M007 Series, 0.57 kW, 52 rpm

The Ingersoll Rand M007RHR374BR6 is an M007 series non-reversible planetary gear vane air motor. Compact and powerful for its size: planetary gearing with a multi-vane motor, instant start and stop, no overheating under load and no damage when stalled. The series meets ATEX requirements.

Specifications at 6.2 bar (90 psi): power 0.57 kW, free speed 52 rpm, speed at max power 26 rpm, stall torque 344 Nm, torque at max power 172 Nm, starting torque 259 Nm, air consumption 1.02 m³/min, weight 3.4 kg, length 278 mm, spindle: 3/4″ round keyed shaft.

Size the motor at about 70% of the lowest available air pressure – we help you choose power, gearing and mounting.

Note: Ingersoll Rand requires the load to be limited to max 304 Nm, even though stall torque is higher.

  • 0.57 kW
  • 52 rpm
  • stall 344 Nm
  • non-reversible
  • 1.02 m³/min
  • ATEX
Other versions in the M007 seriesCompare all in a table →
Request a quote

Price and delivery time on quotation.

SKU: M007RHR374BR6 Category: Brand:

Features

Atlas Copco equivalent: a similar-performance alternative to Atlas Copco LZB motors LZB42 A0005-11.

Based on Ingersoll Rand cross-references (earlier Atlas Copco codes; current lube-free versions are designated LZB..-L-…). Atlas Copco is a trademark of Atlas Copco AB and is used to describe compatibility only. Check mounting and shaft – we will help you choose.

Connections and mounting

  • Air inlet 1/4″ NPT, exhaust 1/2″ NPT
  • Flange: 6-hole face mounting
  • Shaft: 3/4″ round keyed shaft
  • Non-reversible (counterclockwise facing the shaft). Direction of rotation can be changed without extra parts by inverting the cylinder.
  • Performance is the same in both directions of rotation.
  • Inlet and flange can be repositioned relative to each other in 15° steps.
  • Always run the motor with sufficient load so that speed does not exceed the maximum allowable speed.
  • Ingersoll Rand requires the load to be limited to max 304 Nm.

Model code M007RHR374BR6: M007 = series, RH = non-reversible, R = rear air inlet, 374 = gear ratio 1:374, B = flange, R6 = shaft.

Professional tools in Sweden and the Nordics.

Additional information

Weight 3,4 kg
Dimensions 27,8 × 3,8 × 3,8 cm
Weight (kg)

Length (mm)

Series

Air motors

Free speed (rpm)

52

Maximum Torque (Nm)

344

Power (W)

570 W

Air Consumption (l/s)

17

Motor type

Planetary-geared vane motor

How can we help?

Need a quote, technical advice, service or spare parts? Get in touch.

Compare models

Similar models in the same category – technical data side by side.

You are viewingIngersoll Rand M007 Air MotorM007RHR374BR6Ingersoll Rand M007 Air MotorM007RVR374BR6Ingersoll Rand 2200 Air Motor V28276-6AIngersoll Rand 2200 Air Motor V28274-6AIngersoll Rand M007 Air MotorM007RVR275BR6Ingersoll Rand M007 Air MotorM007RHR188BR6
PriceRequest quoteRequest quoteRequest quoteRequest quoteRequest quoteRequest quote
Max. torque344 Nm274 Nm206 Nm206 Nm201 Nm174 Nm
Speed52 rpm47 rpm50 rpm35 rpm64 rpm103 rpm
Weight3.4 kg3.4 kg6.52 kg6.52 kg3.4 kg3.4 kg
Length278 mm278 mm375 mm375 mm278 mm278 mm
Air consumption17 l/s15.5 l/s19.7 l/s16.5 l/s15.5 l/s17 l/s
ViewViewViewViewView