Ingersoll Rand M007RVR275BS5 Planetary Gear Vane Air Motor – M007 Series, 0.46 kW, 64 rpm, reversible
Home
::
Ingersoll Rand M007RVR275BS5 Planetary Gear Vane Air Motor – M007 Series, 0.46 kW, 64 rpm, reversible
Ingersoll Rand M007RVR275BS5 Planetary Gear Vane Air Motor – M007 Series, 0.46 kW, 64 rpm, reversible
The Ingersoll Rand M007RVR275BS5 is an M007 series reversible planetary gear vane air motor. Compact and powerful for its size: planetary gearing with a multi-vane motor, instant start and stop, no overheating under load and no damage when stalled. The series meets ATEX requirements.
Specifications at 6.2 bar (90 psi): power 0.46 kW, free speed 64 rpm, speed at max power 32 rpm, stall torque 201 Nm, torque at max power 100 Nm, starting torque 151 Nm, air consumption 0.93 m³/min, weight 3.4 kg, length 278 mm, spindle: 3/4″ round keyed shaft. Mounting and shaft of this model: 4-hole face mounting, 5/8″ square drive shaft, rear inlet/exhaust (performance as model M007RVR275BR6).
Size the motor at about 70% of the lowest available air pressure – we help you choose power, gearing and mounting.
Note: Ingersoll Rand requires the load to be limited to max 304 Nm, even though stall torque is higher.
Atlas Copco equivalent: a similar-performance alternative to Atlas Copco LZB motors LZB42 AR0006-11.
Based on Ingersoll Rand cross-references (earlier Atlas Copco codes; current lube-free versions are designated LZB..-L-…). Atlas Copco is a trademark of Atlas Copco AB and is used to describe compatibility only. Check mounting and shaft – we will help you choose.
Connections and mounting
Air inlet 1/4″ NPT, exhaust 1/2″ NPT
Flange: 6-hole face mounting
Shaft: 5/8″ square drive
Reversible. Side inlet and exhaust housing available as an option.
Performance is the same in both directions of rotation.
Inlet and flange can be repositioned relative to each other in 15° steps.
Always run the motor with sufficient load so that speed does not exceed the maximum allowable speed.
Ingersoll Rand requires the load to be limited to max 304 Nm.
Model code M007RVR275BS5: M007 = series, RV = reversible, R = rear air inlet, 275 = gear ratio 1:275, B = flange, S5 = shaft.
